MWO Hellbringer
MechWarrior Online Hellbringer, roughly 130mm tall.
Fully articulated, and tested, all parts are error free and printer friendly.
Multiple Torso and weapon options, and like the Atlas, does not require
any glue for assembly. I used a scale table from Mech Warrior Online to
scale the 'Mech. But if you would like to print it a little bit smaller,
most of the detail and joints should still print/work at 75% ~though I
have not tested this.
Multiple Torso and weapon options, and like the Atlas, does not require
any glue for assembly. I used a scale table from Mech Warrior Online to
scale the 'Mech. But if you would like to print it a little bit smaller,
most of the detail and joints should still print/work at 75% ~though I
have not tested this.
zip
MWO Hellbringer.zip14.29 Mb
Notes:
All the parts have
been checked for errors and repaired. All the joints and pins have been
test printed multiple times, and in varying orientations, and while some
orientations are not the best suited for detail preservation, in all
cases the pins/joints worked. So you should not have any problems.
been checked for errors and repaired. All the joints and pins have been
test printed multiple times, and in varying orientations, and while some
orientations are not the best suited for detail preservation, in all
cases the pins/joints worked. So you should not have any problems.
Printing Instructions:
MWO_Hellbringer_LeftLeg_Foot (Flip LeftLeg_Foot in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Lower (Flip LeftLeg_Lower in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Knee (Flip LeftLeg_Knee in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Top (Flip LeftLeg_Top in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Lower (Flip LeftLeg_Lower in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Knee (Flip LeftLeg_Knee in X-axis for right leg) [Print 2]
MWO_Hellbringer_LeftLeg_Top (Flip LeftLeg_Top in X-axis for right leg) [Print 2]
MWO_Hellbringer_Waist [Print 1]
MWO_Hellbringer_TorsoPin [Print 1]
MWO_Hellbringer_Torso (Four options) [Print 1]
*Some
of the Torso options have weapon attachment slots, where any of the
"MWO_Hellbringer_Weapon_"'s can be used [Print 1 or 2 depending]
*Some
of the Torso options have weapon attachment slots, where any of the
"MWO_Hellbringer_Weapon_"'s can be used [Print 1 or 2 depending]
MWO_Hellbringer_LeftArm_Shoulder (Flip LeftArm_Sholder in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_UpperPt1 (Flip LeftArm_UpperPt1 in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_UpperPt2 (Flip LeftArm_UpperPt2 in X-axis for right arm) (Two options) [Print 2]
MWO_Hellbringer_LeftArm_Lower (Flip LeftArm_Lower in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_Elbow_V2 (Flip LeftArm_Elbow in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_Hand (Flip LeftArm_Hand in X-axis for right arm) (Ten options) [Print 2]
MWO_Hellbringer_LeftArm_UpperPt1 (Flip LeftArm_UpperPt1 in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_UpperPt2 (Flip LeftArm_UpperPt2 in X-axis for right arm) (Two options) [Print 2]
MWO_Hellbringer_LeftArm_Lower (Flip LeftArm_Lower in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_Elbow_V2 (Flip LeftArm_Elbow in X-axis for right arm) [Print 2]
MWO_Hellbringer_LeftArm_Hand (Flip LeftArm_Hand in X-axis for right arm) (Ten options) [Print 2]
*Some
of the Hand options have weapon attachment slots, where any of the
"MWO_Hellbringer_Weapon_"'s can be used [Print 1 or 2 depending]
If you experience any problems, or would like to ask me something, please leave a comment.
mech
mecha
battlemech
battletech
mwo
hellbringer
mwchwarrior