MWO Huntsman
MechWarrior Online Huntsman, roughly 125mm tall.
Fully articulated, and tested, all parts should be error free and printer
friendly. Multiple Torso and weapon options, and like the Atlas, does
not require any glue for assembly. The scale might not be quite right
though, as I scaled it so that the medium lasers were roughly the same
size as the ones on the Atlas. And I also used a scale table from Mech
Warrior Online, but, as the Huntsman was not on the table I had to guess
a little using other 'Mechs in the same weight class. I have printed it
at 75% scale and most of the detail, and all the joints still
print/work, so if you would like it slightly smaller it should be fine.
friendly. Multiple Torso and weapon options, and like the Atlas, does
not require any glue for assembly. The scale might not be quite right
though, as I scaled it so that the medium lasers were roughly the same
size as the ones on the Atlas. And I also used a scale table from Mech
Warrior Online, but, as the Huntsman was not on the table I had to guess
a little using other 'Mechs in the same weight class. I have printed it
at 75% scale and most of the detail, and all the joints still
print/work, so if you would like it slightly smaller it should be fine.
MWO Huntsman.zip71.55 MbСкачать
Notes:
All
the parts have been checked for errors and repaired. However as the
original model was warped as well as missing parts and being full of
errors, it may not be 100%. All the joints and pins have been test
printed multiple times, and in varying orientations, and while some
orientations are not the best suited for detail preservation, in all
cases the pins/joints worked. The only joint that is a little finicky is
the "MWO_huntsman_LeftArm_Lower_Type1" and
"MWO_huntsman_LeftArm_Lower_Type2", which requires caution when pushing
it into the "MWO_huntsman_LeftArm_Elbow_V3" socket.
the parts have been checked for errors and repaired. However as the
original model was warped as well as missing parts and being full of
errors, it may not be 100%. All the joints and pins have been test
printed multiple times, and in varying orientations, and while some
orientations are not the best suited for detail preservation, in all
cases the pins/joints worked. The only joint that is a little finicky is
the "MWO_huntsman_LeftArm_Lower_Type1" and
"MWO_huntsman_LeftArm_Lower_Type2", which requires caution when pushing
it into the "MWO_huntsman_LeftArm_Elbow_V3" socket.
Printing Instructions:
MWO_huntsman_LeftLeg_Foot_V5 (Flip LeftLeg_Foot in X-axis for right leg) [Print 2]
MWO_huntsman_LeftLeg_Lower_V4 (Flip LeftLeg_Lower in X-axis for right leg) (Two options) [Print 2]
MWO_huntsman_LeftLeg_Top_V3 (Flip LeftLeg_Top in X-axis for right leg) [Print 2]
MWO_huntsman_LeftLeg_Lower_V4 (Flip LeftLeg_Lower in X-axis for right leg) (Two options) [Print 2]
MWO_huntsman_LeftLeg_Top_V3 (Flip LeftLeg_Top in X-axis for right leg) [Print 2]
MWO_huntsman_Waist_V2 [Print 1]
MWO_huntsman_Torso_Pin [Print 1]
MWO_huntsman_Torso_V5 (Four options) [Print 1]
MWO_huntsman_Torso_V5_Opt3 Gauss (Only print if you print TorsoOpt3) [Print 1]
MWO_huntsman_Torso_V5_Opt3 Gauss (Only print if you print TorsoOpt3) [Print 1]
MWO_huntsman_LeftArm_Sholder_V4 (Flip LeftArm_Sholder in X-axis for right arm) [Print 2]
MWO_huntsman_LeftArm_Elbow_V3 (Flip LeftArm_Elbow in X-axis for right arm) [Print 2]
MWO_huntsman_LeftArm_Lower_Type1 (Flip LeftArm_Lower in X-axis for right arm) (Two options, Type1 & Type2) [Print 2]
MWO_huntsman_LeftArm_Hand_Type1
(Flip LeftArm_Hand in X-axis for right arm) (Seven options for Type 1,
Four options for Type2) [Print 2]
MWO_huntsman_BigGatling,
MWO_huntsman_Gatling, MWO_huntsman_Gauss, MWO_huntsman_PPC or
MWO_huntsman_UAC [Print 1 or 2 ~ depending on the Hands you choose]
MWO_huntsman_LeftArm_Elbow_V3 (Flip LeftArm_Elbow in X-axis for right arm) [Print 2]
MWO_huntsman_LeftArm_Lower_Type1 (Flip LeftArm_Lower in X-axis for right arm) (Two options, Type1 & Type2) [Print 2]
MWO_huntsman_LeftArm_Hand_Type1
(Flip LeftArm_Hand in X-axis for right arm) (Seven options for Type 1,
Four options for Type2) [Print 2]
MWO_huntsman_BigGatling,
MWO_huntsman_Gatling, MWO_huntsman_Gauss, MWO_huntsman_PPC or
MWO_huntsman_UAC [Print 1 or 2 ~ depending on the Hands you choose]
If you experience any problems, or would like to ask me something, please leave a comment.