How do I Connect Netgear WiFi Extender to Router without WPS

Netgear extender setup is the ultimate way to boost your current WiFi range and speed. Although your typical router has more than enough reach to cover a small home or apartment with WiFi, yet it may unable to cover a larger home. As a result, dead zones will crop up in larger homes where you can’t stream your favorite movie, listen to Spotify, or shop online. In such a scenario, using a WiFi range extender can help you out. Once you are done with the Netgear extender setup, it takes your router’s existing WiFi signals and rebroadcasts them to provide you with WiFi in every nook and cranny of your home. The connection established should be netgear_ext.

There are two main ways to complete your new Netgear WiFi range extender setup:

Manual Setup (without WPS) WPS Method

Setup wifi extender Netgear without WPS The manual method for the Netgear extender setup requires you to access the default web user interface. Check out the complete steps to set up your WiFi range extender below:

1- Plugin your wireless extender to a wall socket.

2- Open a web browser on your smart device.

3- Visit mywifiext net web interface.

Note: If you are getting ‘you are not connected to your extender’s network’ error instead of the login page, reach out to our experts for quick help.

4- Once the login window appears, enter the username and password.

5- After that, click the Login button.

6- Enter the WiFi passphrase in the password field.

7- At last, click the Finish button to complete your new extender setup.

That’s it! Once you see four LED green lights on your extender, it means that your Netgear extender setup has been successfully completed. The new network name will be Netgear_ext (SSID).

Though we have listed all the steps to help you make your extender workable, if you find any technical issue during Netgear extender setup, feel free to contact our highly-experienced technicians via chat or email.

Found the manual Netgear WiFi extender setup method a bit tricky? If yes, then go for the WPS method. New extender setup via WiFi Protected Setup or WPS method is very simple. Here’s how to setup WiFi extender using WPS:

1- Put your WiFi range extender on power.

2- Ensure that the power supplied to your extender is fluctuation-free.

3- Press the WPS button on your extender.

4- Now, unplug your extender and place it to your new desired location.

When all four LED lights on your extender lit up, it indicates that your new extender setup has been done properly.

Want to boost the existing network range with a Netgear AC1200 WiFi range extender setup? Struggling in Netgear AC1200 WiFi range extender manual setup? Although Netgear AC122 setup is not a difficult task, still several users face difficulty in Netgear AC1200 WiFi range extender setup. If you are facing the same difficulty then this article might help you. 

Go through the below instructions for Netgear AC1200 WiFi range extender setup by using the installation assistant method:

Step 1:You first need to place your Netgear extender in the same room as that of your router.

Step 2:After that, plug the extender into the power socket and turn on your extender.

Step 3:Thereafter, open the WiFi manager on your computer or laptop and connect to the network of your extender.

Step 4:Launch any internet browser of your preference and enter mywifiext.net in the address bar of the web browser.

Step 5:Now, you will be navigated to the Netgear AC1200 WiFi range extender setup webpage where you need to enter the username and password for login.

Step 6:Once you enter the login credential details, click on the login button.

Step 7: The Netgear installation assistant will display on the screen.

Follow the on-screen instructions to complete the Netgear AC1200 WiFi range extender setup process.

Step 8:At last, unplug your extender and place it in a new location of your choice at home but ensure to place it away from the radioactive devices including washing machine, microwave, cordless monitor, etc.

Step 9:Reconnect the wireless and wired devices to the extended WiFi network.

Look at the below steps for Netgear AC1200 WiFi range extender manual setup:

Step 1:Turn on your Netgear AC1200 extender. Make sure to plug it closer to the router.

Step 2:After that, wait for some time until the power LED light turns to solid green color on your extender.

Step 3:Once the light of the extender is solid green, go to the wireless option on your Netgear AC1200 WiFi range extender device and connect with the wireless network.

Step 4: Next, you are connected to the Netgear AC1200 network. Now, visit  web page where you will see the New Extender Setup option.

Step 5:Click on the new extender setup button and create a Netgear Genie setup account. Click on the Next button.

Step 6:Choose the Access Point or WiFi Range Extender option.

Step 7:If you want your extender to work as a WiFi range extender then choose the WiFi range extender option otherwise access point.

Step 8: Follow on-screen instructions to complete Netgear AC1200 WiFi range extender manual setup.

Installing the Netgear AC1220 extender by using the WPS method is the simplest and quickest method to connect the extender to the existing wireless system. Follow the below instructions for Netgear AC122 Setup:

Step 1:Firstly, plug in your Netgear AC1200 extender nearer to the router.

Step 2:Wait for some time until the power LED light turns to solid green on the extender.

Step 3:Press the WPS button on the Netgear AC1200 extender device. After that, a solid green light flashes on the screen.

Step 4:Push the WPS button on your home router. After 5 minutes, the WPS light on the Netgear extender will turn solid green.

Step 5:Now, you can place your extender to any location of your choice where you do not get a proper internet connection.

Congrats! By following the above-written instructions you can easily complete the Netgear AC1200 WiFi range extender setup without any difficulty